{2}: Video 1 UPS: 75' edison -> 10' edison (if needed) -> UPS: -> [Arisia TV internal distribution] -> 50' edison -> cube tap -> 10' edison -> [video internal distribution at front tables] -> 25' edison -> [video internal distribution at back tables] -> some sort of strip -> intercom base station -> wireless intercom base station {5}: Video 2 non-UPS: 25' edison -> cube tap: -> 10' edison -> [video internal distribution at front tables] -> 25' edison -> [video internal distribution at back tables] -> 50' edison -> [Arisia TV internal distribution] {8}: Video 3 non-UPS: 25' edison -> cube tap -> 10' edison -> [video internal distribution at front tables] -> 25' edison -> [video internal distribution at back tables] -> 10' edison -> cube tap Plus six 10' edison cables for video internal distribution. Plus one 50' edison cable in case we fall back on arisia-owned camera system which needs power at the cameras. {1}: Video projectors: 50' edison -> cube tap (at base of SR projector support) -> 10' edison -> projector SR -> 100' edison -> projector SL -> [available outlet for DVD player, etc] {11}: Audio control: 50' edison -> [audio internal distribution] (three to four power strips to be provided) {14}: Audio amp SR: 50' edison -> amplifier rack {3}: Stage power DSC / Masquerade rehearsal tech / backstage safety lights: 50' edison -> 10' edison -> cube tap (at USR corner of wing) -> 50' edison -> cube tap (at USL corner of wing) -> 50' edison (enough length to pull onstage or to rehearsal table) -> power strip (stowed under DSC) -> 25' edison -> power strip (at DS center) -> 5' cable -> Mega PAR -> 5' cable -> Mega PAR -> Mega PAR -> Mega PAR -> 5' cable -> Mega PAR -> 5' cable -> Mega PAR {9}: Lighting control: 50' edison -> power strip -> UPS (provided with Ion) -> ETC Ion -> monitors for Ion -> Video reference monitor -> 10' edison (to followspot above) -> lamp dimmer -> desk lamp {4}: Cyc lights SR: 1260 watt 50' edison -> 10' edison (if needed) -> cube tap -> ColorBlaze 72 -> ColorBlaze 72 -> 15' edison -> ColorBlaze 72 {6}: Cyc lights SL: 1260 watt 75' edison -> 10' edison (if needed) -> cube tap -> ColorBlaze 72 -> ColorBlaze 72 -> 15' edison -> ColorBlaze 72 {13}: Dimmer SR: 2000 watt 50' edison -> 10' edison -> Lightronics XC-40D (Belly dance:) -> edison/stage pin cable -> fresnel -> edison/stage pin cable -> fresnel -> edison/stage pin cable -> 5' stage pin -> fresnel -> edison/stage pin cable -> 5' stage pin -> fresnel (Masq:) -> 25' edison -> power strip -> judges' reading lights ## --> H*: which should probably be direct feed instead {10}: Dimmer SL: 1050 watt 75' edison -> Leprecon LD 360 (side 1) -> zipcord extension -> stage edge safety lights (Belly dance:) -> edison/stage pin cable -> fresnel -> edison/stage pin cable -> 5' stage pin -> fresnel {12}: Dimmer SL: 1050 watt 75' edison -> Leprecon LD 360 (side 2) -> 25' edison zipcord -> MC reading light (Belly dance:) -> edison/stage pin cable -> fresnel -> edison/stage pin cable -> 5' stage pin -> fresnel {15}: Backlights: 1500 watt 50' edison -> 10' edison -> LD 360 (side 1) -> edison/stage pin cable -> 15' stage pin cable -> fresnel -> edison/stage pin cable -> 25' stage pin cable -> fresnel -> edison/stage pin cable -> 25' stage pin cable -> 5' stage pin cable -> fresnel {16}: Backlights: 1500 watt 50' edison -> 10' edison -> LD 360 (side 2) -> edison/stage pin cable -> 15' stage pin cable -> fresnel -> edison/stage pin cable -> 25' stage pin cable -> fresnel -> edison/stage pin cable -> 25' stage pin cable -> 5' stage pin cable -> fresnel {7}: -spare- HR scaff/followspot: [wall outlet] -> 25' edison (if needed) -> H* strip -> followspot -> show-caller desk, etc Run from floor to truss is 44' (or so). PSAV says bring 150' of cable. There will be seven cables in this run: two 6-channel socapex, two edison, two microphone, and one DMX. Power portion of run will be 75' from PDU. Microphone cables to snake near USR corner of stage: 100' from truss end. 100' Socapex run #1 130' Socapex run #2 {17}: Truss circuit 1: 1580 watt - Socapex run #1 circuit 1 -> cube tap -> 10' edison -> Martin 918 (L7) -> 15' edison -> Martin 918 (L13) {18}: Truss circuit 2: 1300 watt - Socapex run #1 circuit 2 -> cube tap -> 15' edison -> edison male/powercon in -> Lustr+ (L5) -> 2.5' powercon -> Lustr+ (L4) -> 10' powercon -> Lustr+ (L2) -> 2.5' powercon -> Lustr+ (L1) -> 15' edison -> edison male/powercon in -> Lustr+ (L12) -> 2.5' powercon -> Lustr+ (L14) -> 2.5' powercon -> Lustr+ (L15) -> edison male/powercon in -> Lustr+ (C3) -> 10' powercon -> Lustr+ (C7) -> 10' powercon -> Lustr+ (C11) {19}: Truss circuit 3: 2000 watt - Socapex run #1 circuit 3 -> Leprecon ULD-360DMX-HP (C4) input 1 -> S4 (C1) -> S4 (C2) -> 25' stage pin -> Kliegl scoop (L3) {20}: Truss circuit 4: 2000 watt - Socapex run #1 circuit 4 -> Leprecon ULD-360DMX-HP (C4) input 2 -> 5' stage pin -> S4 (L8) -> 10' stage pin -> S4 (L9) -> 10' stage pin -> stage pin male/edison female -> Kliegl scoop (L6) {21}: Truss circuit 5: 2000 watt - Socapex run #1 circuit 5 -> Leprecon ULD-360DMX-HP (C8) input 1 -> S4 (C5) -> S4 (C6) -> 25' stage pin -> stage pin male/edison female -> PAR 64 WFL (L10) {22}: Truss circuit 6: 2000 watt - Socapex run #1 circuit 6 -> Leprecon ULD-360DMX-HP (C8) input 2 -> 5' stage pin -> S4 (C9) -> 10' stage pin -> S4 (C10) -> 25' stage pin -> stage pin male/edison female -> PAR 64 WFL (L11) {23}: Truss circuit 7: 1580 watt - Socapex run #2 circuit 1 -> cube tap -> 15' edison -> Martin 918 (R3) -> 10' edison -> Martin 918 (R7) {24}: Truss circuit 8: 1300 watt - Socapex run #2 circuit 2 -> cube tap -> 15' edison -> edison male/powercon in -> Lustr+ (R4) -> 2.5' powercon -> Lustr+ (R2) -> 2.5' powercon -> Lustr+ (R1) -> 15' edison -> edison male/powercon in -> Lustr+ (R8) -> 2.5' powercon -> Lustr+ (R9) -> 10' powercon -> Lustr+ (R12) -> 2.5' powercon -> Lustr+ (R13) -> edison male/powercon in -> Lustr+ (C23) -> 10' powercon -> Lustr+ (C20) -> 10' powercon -> Lustr+ (C14) {25}: Truss circuit 9: 2000 watt - Socapex run #2 circuit 3 -> Leprecon ULD-360DMX-HP (C23) input 1 -> S4 (C25) -> S4 (C26) -> 25' stage pin -> Kliegl scoop (R11) {26}: Truss circuit 10: 2000 watt - Socapex run #2 circuit 4 -> Leprecon ULD-360DMX-HP (C23) input 2 -> 10' stage pin -> S4 (C21) -> 5' stage pin -> S4 (C22) -> 25' stage pin -> 6" Fresnel (R10) {27}: Truss circuit 11: 2000 watt - Socapex run #2 circuit 5 -> Leprecon ULD-360DMX-HP (C27) input 1 -> S4 (C28) -> S4 (C30) -> 25' stage pin -> stage pin male/edison female -> PAR 64 WFL (R5) {28}: Truss circuit 12: 2000 watt - Socapex run #2 circuit 6 -> Leprecon ULD-360DMX-HP (C27) input 2 -> S4 (C29) -> S4 (C31) -> 25' stage pin -> stage pin male/edison female -> PAR 64 WFL (R6) {29}: Truss circuit 13: 2250 watt - 25' edison -> 100' edison -> Leprecon ULD-360DMX-HP (C17) input 1 -> S4 (C16) -> 5' stage pin -> S4 (C15) -> 5' stage pin -> S4 (C13) {30}: Truss circuit 14: 2135 watt - 25' edison -> 100' edison -> cube tap -> Leprecon ULD-360DMX-HP (C17) input 2 -> S4 (C18) -> 5' stage pin -> S4 (C19) -> 5' stage pin -> S4 PAR (C12) -> DMX iris